Visteon, SHINRY and Infineon Develop Single-Stage GaN Onboard Charger for EVs
- Published
- Author
- Semiconductor For You
- Reads
- 327
The 22 kW three-phase and 19.2 kW single-phase charger combines a single-stage topology with GaN bidirectional switches and V2X capability.

A single-stage onboard charger could reduce the number of power-conversion components in an electric vehicle while supporting bidirectional energy flow. Visteon Corporation, SHINRY Technologies Co. Ltd. and Infineon Technologies AG are collaborating through the Visteon-Shinry Power Electronics LLC (VSPE) joint venture to develop such a charger, pairing VSPE’s converter design and control approach with Infineon gallium nitride (GaN) monolithic bidirectional switches.
The companies announced the work on 11 November 2026 during the electronica trade fair in Munich, Germany. The charger is designed for 22 kW three-phase AC charging or 19.2 kW single-phase AC charging, and supports vehicle-to-everything (V2X) bidirectional operation. That combination targets both charging from an AC supply and energy transfer from the vehicle to external systems.

Combining conversion stages
Conventional two-stage onboard chargers use separate stages for power-conversion functions. VSPE’s proposed architecture brings those functions into a single stage and eliminates the bulk capacitors used in conventional two-stage designs. Fewer conversion stages and the removal of these capacitors can simplify the system and create opportunities for a smaller package and lower cost.
Those design changes also shift the engineering challenge: the single stage must perform the required conversion and bidirectional functions within the same power architecture. The companies describe the charger as supporting full V2X capability, which allows energy to flow in both directions between the vehicle and connected systems. The announcement does not specify charging voltages, conversion efficiency, dimensions, mass, cost, or the conditions used to assess reliability, so those figures can’t yet be compared with existing OBCs.
Removing bulk capacitors is a defining feature of the design, while the claimed benefits—improved reliability, reduced complexity, more compact packaging and lower cost—are design aims. The announcement gives no test results establishing the scale of those benefits. For vehicle engineers assessing an OBC, validation data and system-level integration details will be needed to judge how the architecture performs across operating conditions.
Why use monolithic GaN switches
Infineon’s GaN bidirectional switches are intended to suit the architecture because each monolithic device integrates bidirectional voltage blocking and current conduction. In a design that needs bidirectional switching, combining those functions in one device can reduce the number of semiconductor components in the power stage and simplify its implementation.
GaN’s high-frequency switching capability offers another design lever. Switching at higher frequencies can help reduce the size of magnetic components, which may support a more compact charger. The practical result depends on the complete converter design, including its control strategy, thermal management and component selection; the companies have not published specific switching frequencies, thermal limits or power-density figures for this charger.
The collaboration divides the work across complementary areas. VSPE brings its converter hardware topology, proprietary control strategy and system-integration expertise. Infineon supplies the GaN monolithic bidirectional switch technology. The device and topology need to operate as a coordinated system: semiconductor integration may simplify the switching hardware, while control and packaging choices determine how the resulting charger behaves in an EV application.
Validation is the next milestone
Company representatives presented the work as a development effort for next-generation EV platforms. Zilai Zhao, co-general manager at VSPE, described the collaboration as combining vehicle electronics, power conversion and semiconductor capabilities. SHINRY CTO Mark Sun said the company’s research and development team is working to validate the architecture against the reliability requirements of automotive customers.
Infineon vice president for GaN Automotive Benoit Rousseau pointed to the switch’s integration and switching performance as enablers for new conversion architectures. Infineon also said the device was recognized as a “Global New Energy Vehicle Innovative Technology” at the 2026 World New Energy Vehicle Congress. That recognition is separate from evidence of the charger’s performance in vehicle testing.
No production timing, vehicle application, certification status or test results were included in the announcement. The clearest technical markers to watch are therefore validation of the single-stage conversion approach, demonstrated operation at the stated charging ratings, and evidence that the package delivers the intended reliability and size benefits. Further information on Infineon’s automotive GaN technology is available at infineon.com/product-information/gan-auto.