TI TICS100MOD Combines EtherCAT, EtherNet/IP and Profinet on One Module
- Published
- Author
- Semiconductor For You
- Reads
- 960
TI’s TICS100MOD switches among three Industrial Ethernet protocols by firmware; the TIOM2212 adds a dual-channel IO-Link connection to field devices.

TI’s TICS100MOD puts EtherCAT, EtherNet/IP and Profinet support on one compact communications module, with protocol selection handled through firmware at boot. That could let equipment designers adapt a shared hardware platform to different network requirements without building a separate Ethernet design for each protocol. TI also introduced the TIOM2212, a dual-channel IO-Link master that connects sensors and actuators to higher-level factory networks.

Announced by Texas Instruments on Nov. 5, 2026, the two devices address different points in an industrial control system. The TICS100MOD handles real-time Ethernet communication, while the TIOM2212 links IO-Link field devices into a control network. Together, they extend TI’s portfolio across the connection from controllers and network infrastructure down to sensors and actuators.

One hardware design for three Ethernet protocols
The TICS100MOD is built around TI’s AM2612 microcontroller and DP83826AI Ethernet physical layer. It includes two Arm Cortex-R5F cores and external memory to run protocol stacks and factory automation applications. TI describes it as its smallest fully featured, certified multiprotocol communications system-on-module; the module supports EtherCAT, EtherNet/IP and Profinet on the same hardware.
For design teams, the practical change is the option to select a protocol at boot through a firmware update. A machine builder serving customers with different network requirements could adapt the communication function without replacing the module or redesigning the board around a different protocol-specific device. The approach may also reduce the number of hardware variants that need to be integrated and maintained.
That flexibility has a defined scope: the stated protocol switch occurs through firmware at boot. TI does not describe changing protocols during active operation, nor does the announcement provide cycle-time figures, memory capacity, module dimensions or power consumption. Those details matter when comparing the module against a specific controller design or validating a real-time application.
TI says its multiprotocol platform combines programmable hardware with certified software stacks. The company also highlights access to the media access control layer, which gives developers room to customize protocol implementations. That capability may matter when an application needs adjustments across the communications stack, though the amount of work will depend on the intended network and the supplied development resources.
IO-Link connects the network to sensors and actuators
The TIOM2212 is a dual-channel IO-Link master. It provides the field-device connection for IO-Link sensors and actuators, with an integrated frame handler supporting communication between the master and compatible TI networking products. TI lists compatibility with its Sitara industrial networking system-on-chip family and AM13Ex real-time microcontrollers.
Its position in the system is distinct from the TICS100MOD’s Ethernet function. IO-Link serves connections at the sensor and actuator level; the master provides a route from those devices to an upstream factory network. TI says the TIOM2212 includes analog integration and built-in protection features intended to support reliable data exchange. The announcement does not give channel ratings, electrical limits or protection thresholds, so those specifications will be necessary for component selection and system design.
With the TIOM2212, TI says its IO-Link hardware spans transceivers, digital output switches and a master device with an integrated frame handler. This broader coverage gives engineers a set of TI components for multiple parts of an IO-Link design. The actual fit still depends on the requirements of the field devices, controller, cabling and operating environment.
What the multiprotocol approach changes for development
Factory floors often bring together equipment that communicates over different industrial networks. Building a distinct hardware path for each protocol can add board variants, integration work and maintenance demands. A shared platform with firmware-selected protocols offers a way to manage that variation in software, while keeping the communication hardware consistent across designs.
TI also offers an industrial communications software development kit with protocol stacks, application examples, training materials, and development and troubleshooting tools. Evaluation modules are part of the development resources. These tools can help teams assess the platform and build applications, but the announcement does not state certification details for each protocol, the development effort required, or support terms for particular configurations.
At the chip level, TI’s multiprotocol strategy uses its programmable real-time unit and industrial communication subsystem, or PRU-ICSS, in select MCUs and SoCs. The dedicated block handles deterministic, low-latency communications tasks, leaving the general-purpose Arm processor cores available for other application work. This division of labor is intended to combine predictable network handling with the computing capacity needed by the broader control application.
TI plans to demonstrate the TICS100MOD at electronica in Munich from Nov. 10 to 13, 2026, including a multiprotocol Ethernet demonstration and a presentation on Ethernet, IO-Link, neural processing units and time-sensitive networking. The company says preproduction quantities of the TIOM2212 are available on TI.com, while the TICS100MOD is expected to be available by year-end 2026. The listed development resources include the industrial communications SDK and TIOL221 evaluation module.
For engineers evaluating the parts, the key questions are whether the supported protocols match the target machine’s network, how the supplied software fits the application, and whether the electrical and timing details meet system requirements. TI’s approach could simplify designs that need to serve multiple Ethernet environments; module specifications and development documentation will determine how directly that flexibility carries into a finished product.