Skip to content

Infineon Details 800 VDC Data Centre Hardware and 300 mm GaN and SiC Plans

Published
Author
Aalyia Shaukat
Reads
824

Infineon is moving 800 VDC hardware toward customer installations while expanding capacity in silicon, GaN and SiC to meet rising power demand.

Infineon Details 800 VDC Data Centre Hardware and 300 mm GaN and SiC Plans

Infineon’s work on 800 VDC infrastructure is moving from laboratory development toward customer hardware, as demand for power semiconductors pushes the company to expand manufacturing capacity. At Electronica 2026, Adam White, Infineon’s Division President of Power Systems, described progress on solid-state transformers (SSTs), solid-state circuit breakers (SSCBs) and production plans spanning silicon, silicon carbide (SiC) and gallium nitride (GaN).

The practical test for 800 VDC will be whether the wider industry can coordinate equipment, protection and standards as systems move into service. White said Infineon is beginning to ship solutions and that some are being installed. Broader use, he argued, depends on an ecosystem that can support both the electrical architecture and the shift in product mix from AC to DC.

800 VDC moves into customer hardware

White sees data-centre power infrastructure as a leading area of activity, with customers now taking 800 VDC work beyond lab experiments. The architecture is drawing attention from customers, and Europe has a substantial part of the relevant ecosystem, he said.

One part of Infineon’s offer is its solid-state transformer work. The company is beginning to ship modules in EasyPACK packages and is positioning its 3.3 kV SiC technology for SST designs. White described a strong customer pipeline for these systems, including infrastructure serving both AI and non-AI applications. That distinction matters: the demand driver may be closely associated with AI data centres, but the potential use cases he described extend beyond them.

SSCBs are another piece of the 800 VDC system. Infineon and Siemens have collaborated on a solid-state circuit breaker; Infineon CEO Jochen Hanebeck presented the first product on the Tuesday morning of the event. White called it a finished product ready for deployment and said the companies are taking the technology into the industry.

Solid-state protection is still relatively new, however. AC protection and DC protection present different technical requirements, and White stressed that the work needs to be done with industry partners. Products are starting to be installed, but more widespread adoption will depend on alignment around standards and regulations. The hardware is advancing; a mature protection framework and coordinated supply of DC equipment still need to develop alongside it.

Manufacturing capacity across three materials

Infineon’s capacity response spans silicon, SiC and GaN. White linked the investment to the surge in customer demand for power semiconductors, especially as data-centre loads grow. He said he has worked in power for 30 years and has not previously seen customer pull and production ramps at this scale.

The Dresden facility is intended for power and analog mixed-signal manufacturing. It opened in July and, White said, is among the world’s largest 300 mm shells with a clean room. The site has room to scale, but its production ramp depends on installing equipment and completing customer qualifications. Infineon’s teams are working around the clock on both tasks.

White said the company is working with major industry customers to secure supply and build capacity. He cited MOSFETs and analog mixed-signal products as areas where the added capacity can matter. The immediate work is to bring the facility into production readiness; the larger aim is to give Infineon space to grow output as customers qualify the site and demand develops.

300 mm wafers for GaN and SiC

Infineon is also investing in 300 mm GaN manufacturing at its Villach fab. White referred to a €1.1 billion investment aimed at high-volume manufacturing. He said the company has demonstrated that 300 mm GaN can support mid-voltage devices, while low-voltage GaN is expected to ramp later. Infineon has scheduled production to start by the end of 2027.

Moving to 300 mm wafers is a capacity strategy: larger wafers can yield more power devices per production cycle. White said the industry needs these technologies on 12-inch wafers to supply its customer base. The manufacturing move is not just a matter of scaling an existing line; it also requires processes that can produce devices reliably at the larger wafer size.

On SiC, White described functional power devices made on 300 mm wafers as a world first, based on Infineon’s understanding. The achievement is an early process demonstration, rather than a disclosed production ramp. White identified thin epitaxial layers, wafer handling and yield as key manufacturing challenges. The company did not share further process details, citing the value of keeping its intellectual property and know-how in-house.

White expressed confidence that the work can scale, while stopping short of providing a production timetable or yield figures for 300 mm SiC. Those details will determine how quickly the demonstration can turn into useful capacity. For now, Infineon’s public milestones show two different stages: 300 mm GaN is moving toward planned high-volume production, while 300 mm SiC has reached functional devices and still faces manufacturing hurdles.

What to watch as demand rises

The developments connect power-system design to factory execution. SSTs and SSCBs give customers hardware to evaluate for 800 VDC systems, while Dresden, Villach and the 300 mm SiC work address the manufacturing base needed to supply power devices. Each track has its own constraint: system protection and standards for DC infrastructure, customer qualification for Dresden, and process capability for wide-bandgap devices.

For engineers planning data-centre power architectures, the near-term signal is that 800 VDC components are beginning to reach customer use, but system adoption remains an ecosystem task. For device and manufacturing teams, the signal is the scale of the capacity push and the effort to bring GaN and SiC onto 300 mm wafers. The next concrete markers are customer qualifications, the scheduled GaN production start by the end of 2027, and further evidence that 300 mm SiC processes can deliver suitable yield.

Source: Aalyia Shaukat · www.powerelectronicsnews.com

Related reading