IoT and Technology Events: Global Dates and Locations Through 2027
- Published
- Author
- Dennis Knake
- Reads
- 646
A dated directory of IoT, electronics, automation, sensor and manufacturing events across 2026 and 2027, with locations and planning notes.

The calendar spans the full engineering chain around connected products: embedded systems, sensors, electronics manufacturing, industrial automation, logistics and energy. For teams choosing where to spend travel time, the useful distinction is often the technical community gathered at each event, not simply its size. This directory lists dates and locations available as of October 2026; several late 2027 dates remain tentative or unconfirmed.

Dates that overlap will affect planning. In February 2027, E-world energy & water and EuroCIS both run in Essen and Düsseldorf, respectively, from February 16–18. In March, Embedded World and LogiMAT coincide from March 16–18, in Nuremberg and Stuttgart. June is particularly crowded: COMPUTEX Taipei and Shoptalk Europe run June 1–4 and June 1–3, while Smart Manufacturing Week and Hardware Pioneers Max share June 9–10. These overlaps may matter for engineers whose work crosses sectors.

Late 2026: electronics, production and connected systems
The 2026 dates begin with Smart City Expo World Congress in Barcelona, November 3–5, followed by electronica in Munich, November 10–13. The International Congress on Internet of Things takes place in Bangkok on November 19–20, between electronica and SPS in Nuremberg, November 24–26. GITEX GLOBAL closes the year’s listed schedule in Dubai, December 8–11.

- Smart City Expo World Congress 2026 — Barcelona, Spain; November 3–5.
- electronica 2026 — Munich, Germany; November 10–13.
- International Congress on Internet of Things 2026 (ICIOT 2026) — Bangkok, Thailand; November 19–20.
- SPS 2026 (Smart Production Solutions) — Nuremberg, Germany; November 24–26.
- GITEX GLOBAL 2026 — Dubai, United Arab Emirates; December 8–11.
January to April 2027: embedded, communications and industrial systems
The 2027 calendar opens in the United States with CES in Las Vegas, January 6–9, and NRF in New York, January 10–12. IoT Tech Expo Global follows in London on February 3–4. MWC Barcelona, March 1–4, is followed by the paired Nuremberg and Stuttgart dates for Embedded World and LogiMAT. Later in March, Shoptalk Spring meets in Las Vegas, March 22–24.

April brings HANNOVER MESSE, April 5–8, and Japan IT Week Spring’s IoT Systems Development Expo, April 7–9. Their dates overlap for three days, across Hanover and Tokyo. The month ends with transport logistic in Munich, April 26–29. For a team tracking connected devices from embedded design to deployment in factories, retail or transport, this sequence offers several different points of contact across the engineering and operating chain.
- CES 2027 (Consumer Electronics Show) — Las Vegas, USA; January 6–9.
- NRF 2027 (Retail’s Big Show) — New York, USA; January 10–12.
- IoT Tech Expo Global 2027 — London, United Kingdom; February 3–4.
- E-world energy & water 2027 — Essen, Germany; February 16–18.
- EuroCIS 2027 — Düsseldorf, Germany; February 16–18.
- MWC Barcelona 2027 — Barcelona, Spain; March 1–4.
- Embedded World 2027 — Nuremberg, Germany; March 16–18.
- LogiMAT 2027 — Stuttgart, Germany; March 16–18.
- Shoptalk Spring 2027 — Las Vegas, USA; March 22–24.
- HANNOVER MESSE 2027 — Hanover, Germany; April 5–8.
- Japan IT Week Spring 2027 – IoT Systems Development Expo — Tokyo, Japan; April 7–9.
- transport logistic 2027 — Munich, Germany; April 26–29.
May to July: automation, sensors and hardware
May’s schedule combines Automate in Las Vegas, May 10–13, with SENSOR+TEST in Nuremberg, May 11–13. COMPUTEX Taipei and Shoptalk Europe start on the same day in June, and Sensors Converge follows in Santa Clara, June 8–10. Smart Manufacturing Week and Hardware Pioneers Max share dates in Birmingham and London, June 9–10. The IoT Tech Expo North America and VivaTech then overlap from June 16–17, with VivaTech continuing through June 19. MWC Shanghai runs June 23–25.
- Automate 2027 — Las Vegas, USA; May 10–13.
- SENSOR+TEST 2027 — Nuremberg, Germany; May 11–13.
- COMPUTEX Taipei 2027 — Taipei, Taiwan; June 1–4.
- Shoptalk Europe 2027 — Barcelona, Spain; June 1–3.
- Sensors Converge 2027 — Santa Clara, USA; June 8–10.
- Smart Manufacturing Week 2027 — Birmingham, United Kingdom; June 9–10.
- Hardware Pioneers Max 2027 — London, United Kingdom; June 9–10.
- IoT Tech Expo North America 2027 — San Jose, USA; June 16–17.
- VivaTech 2027 — Paris, France; June 16–19.
- MWC Shanghai 2027 — Shanghai, China; June 23–25.
August to November: connected products and manufacturing
The schedule resumes in August with Maker Faire Hannover, though its exact dates are still to be determined. IFA in Berlin runs September 3–7, followed by IAA MOBILITY in Munich, September 7–12. The Things Conference takes place in Amsterdam, September 28–29. October includes Smart Country Convention in Berlin, October 5–7, Embedded World North America in Long Beach, October 12–14, and IoT Tech Expo Europe in Amsterdam, October 19–20. it-sa Expo&Congress is listed for October, with dates to be determined.
November’s listed events are Smart City Expo World Congress in Barcelona, scheduled for early November but still to be confirmed; productronica in Munich, November 16–19; and SPS in Nuremberg, November 23–25. GITEX GLOBAL is listed for the fourth quarter, with its 2027 dates to be determined.
- Maker Faire Hannover 2027 — Hanover, Germany; August, date to be determined.
- IFA 2027 — Berlin, Germany; September 3–7.
- IAA MOBILITY 2027 — Munich, Germany; September 7–12.
- The Things Conference 2027 — Amsterdam, Netherlands; September 28–29.
- Smart Country Convention 2027 — Berlin, Germany; October 5–7.
- Embedded World North America 2027 — Long Beach, USA; October 12–14.
- IoT Tech Expo Europe 2027 — Amsterdam, Netherlands; October 19–20.
- it-sa Expo&Congress 2027 — Nuremberg, Germany; October, date to be determined.
- Smart City Expo World Congress 2027 — Barcelona, Spain; early November, date to be confirmed.
- productronica 2027 — Munich, Germany; November 16–19.
- SPS 2027 (Smart Production Solutions) — Nuremberg, Germany; November 23–25.
- GITEX GLOBAL 2027 — Dubai, United Arab Emirates; fourth quarter, dates to be determined.
This directory is not exhaustive, and the listed details are provided without guarantee. Check the linked event pages before making travel plans, especially for entries marked as tentative or awaiting dates. The calendar’s main practical value is its spread across disciplines: teams can prioritize the gatherings closest to their hardware, deployment environment and supply chain, then account for the overlaps when building a travel schedule.