Skip to content

Semtech Adds SGP.32 eSIM Profiles to AirVantage IoT Connectivity Management

Published
Author
IoT.Business.News
Reads
867

Semtech’s SGP.32 service pairs multi-network connectivity with remotely managed local operator profiles, with a separate option for battery-constrained devices.

Semtech Adds SGP.32 eSIM Profiles to AirVantage IoT Connectivity Management

Semtech Adds SGP.32 Multi-Profile eSIM Support to Its Global IoT Connectivity Offering

Semtech Adds SGP.32 Multi-Profile eSIM Support to Its Global IoT Connectivity Offering

For an IoT product shipped across several countries, the SIM configuration can become a constraint on manufacturing and long-term service. Semtech’s Smart Connectivity Premium with SGP.32 support is designed to let manufacturers use one device configuration while managing multiple connectivity profiles remotely. The offering combines Semtech’s multi-IMSI connectivity with local mobile network operator (MNO) profiles, orchestrated through its AirVantage platform.

Semtech says the service became commercially available on November 9, 2026. Its practical appeal is clearest for fleet operators seeking to adapt connectivity to local network conditions or roaming requirements without physically replacing SIMs. The approach can reduce the need to maintain separate product variants for each market, although the available operator profiles in a given country will determine how much flexibility a deployment actually gains.

One device configuration, multiple connectivity profiles

Semtech describes the design as a single-SKU architecture. A common eSIM configuration combines the company’s Smart Connectivity Advanced multi-IMSI profile with additional local carrier profiles. Manufacturers can therefore build identical devices for different markets and adjust their operator configuration as needed.

That distinction matters for equipment expected to remain in service for years. Smart meters and surveillance systems, for example, may need a local subscription in markets where permanent roaming is restricted. Mobile assets that cross regional boundaries may benefit from access to more than one carrier, reducing reliance on a single network connection. These are deployment examples; actual coverage and profile availability depend on the operators supported in each location.

Multiple profiles also provide a way to adapt after installation. If network availability or service requirements change, a profile can be downloaded or switched remotely, subject to the device’s capabilities and the available subscriptions. This can reduce field visits for connectivity changes, but it does not remove the need to plan for coverage, service continuity and operator availability before deployment.

The SGP.32 implementation extends capabilities Semtech previously offered under the SGP.02 specification. Semtech points to preloaded configurations and self-configuration options as part of the newer approach for IoT use. In practical terms, profile management can be built into the device lifecycle rather than treated as a one-time provisioning decision at manufacturing.

AirVantage centralizes profile operations

Supporting more than one profile is only useful if operators can manage the fleet without handling each device individually. Semtech’s AirVantage eSIM orchestrator provides centralized bulk provisioning, subscription management and connectivity lifecycle operations. Customers can work through the AirVantage interface or connect the platform to their own systems through APIs.

According to Semtech, an embedded eSIM applet works with the device to download, enable and switch profiles automatically when required. That arrangement moves profile changes into software workflows, which may simplify management across geographically distributed fleets. The specific behavior will still depend on how the device and service are configured, and on whether an appropriate profile is available for the target network.

Kigen supplies the underlying eSIM and eSIM IoT Manager (eIM) technology. Kigen’s technology supports SGP.32 version 1.3 and holds GSMA eUICC Security Assurance certification. The division of roles places profile orchestration in AirVantage while relying on Kigen technology for eSIM and eIM functions.

PowerSave targets battery-operated devices

Semtech also offers PowerSave eSIM for designs where battery life is a primary constraint. It uses a multi-network, dual-profile configuration intended to optimize network attachment times and support transmission of critical data while limiting battery impact.

This gives product teams two configurations to consider. PowerSave is a preloaded option for battery-constrained devices; Smart Connectivity Premium supports downloading additional MNO profiles alongside Semtech’s existing connectivity profile. Both are managed through AirVantage.

The distinction highlights a design trade-off. More profile choices can help a device connect across markets, but battery-operated equipment must also account for the energy used during network attachment and profile operations. Connectivity architecture therefore needs to be evaluated alongside coverage and the device’s expected reporting behavior. Semtech describes PowerSave’s intended benefits but does not provide specific power measurements or test conditions in the announcement.

Deployment depends on operator reach

The launch is part of the commercial move toward GSMA SGP.32 for IoT remote SIM provisioning. Berg Insight analyst Fredrik Stalbrand estimated that approximately 12% of cellular IoT devices used eSIM technology at the end of 2025. The figure provides context for adoption; it does not indicate how many devices will use Semtech’s service or SGP.32 specifically.

For OEMs and system integrators, the larger change is the option to separate hardware production from some connectivity decisions. A common device configuration can serve multiple markets, while subscriptions may be adapted remotely over the product’s operating life. That can simplify product variants, but it still leaves teams needing to confirm local profile availability and integration requirements for their target deployments.

Semtech identifies non-terrestrial networks (NTN) as a possible future option for mobile assets. The service announcement does not specify NTN operator integrations. Semtech says it plans to add multi-profile support for more carriers and markets in the coming months, without giving an operator list or geographic rollout schedule.

The value of the service will turn on the fit between local operator coverage, automated profile management and each device’s power and lifecycle requirements. SGP.32 provides the mechanism for remote profile handling; the deployment work remains in choosing suitable profiles and confirming that the end-to-end configuration meets the needs of the fleet.

Source: IoT.Business.News · iotbusinessnews.com

Related reading